SPRING4 + HEAT PUMP
PVT-Source Heat Pump
Dualsun’s SPRING4 finned hybrid panels pair perfectly with a liquid-to-water heat pump to generate electricity, hot water, and solar heating for your home or building.
This combination offers a silent, efficient alternative to air-to-water heat pumps by using PVT technology as a thermal source—no outdoor unit or boreholes needed.
Moreover, it significantly reduces dependence on district heating, gas, or biomass, while allowing future integration with geothermal storage.
This system provides 6-8 times more solar energy from the roof surfaces compared to PV.
Invisible Energy
The PVT heat pump is placed indoors. No outdoor unit means no noise and better aesthetics.
20% more efficient
Outperforms PV + air-to-water systems with a 20% higher Seasonal Performance Factor (SPF).
Future safe
Flexibility of system allows possibility to easily upgrade to full geothermal or disconnect from district heating.
PVT Heat Pump vs. PV + Air-to-Water HP
The Power of PVT
The SPF (Seasonal Performance Factor) measures the system’s real-world efficiency—it’s the ratio between all the heat produced and all the energy consumed. Self-consumed PV electricity within the heat pump is included in the calculation.
A higher SPF = more heat, less energy, greater savings.
For the same investment, the SPRING4 PVT + water-to-water heat pump is the best solution—up to 20% more efficient than a PV + air-to-water system!
On top of that: no moving parts outdoors, no noise, higher electricity yield, longer lifespan, and the flexibility to upgrade with boreholes. It’s a no-brainer.


HOW DOES IT WORK?
Solar that works both day and night
The hybrid solar PVT-source heat pump is a water-to-water heat pump installed inside the building. Instead of using an outdoor unit, it draws heat from hybrid solar panels mounted on the roof. A single system that maximizes locally-produced renewable energy.

DURING THE DAY
The hybrid solar panels capture both sunlight and heat to power the heat pump, heating the building and water—while also generating electricity.
Water circulates through the SPRING4 panels, where it is heated via an integrated heat exchanger on the backside of the panels and then transferred to the indoor water-water heat pump.
A safety valve protects the evaporator by diverting the flow if the glycol temperature exceeds 20–30°C.

AT NIGHT
The panels continue to absorb heat from the air, thanks to the finned design of the SPRING4’s heat exchanger, providing energy to the heat pump even without sunlight.
The heat exchanger draws energy from the ambient air, even with a temperature difference (ΔT) of just 5°C.
The ground-source heat pump (GSHP) is designed to operate efficiently down to –15°C at the evaporator outlet.
The Magnolia project in Lund illustrates how the combination of hybrid solar energy, heat pumps and district heating networks can deliver outstanding energy performance.

The hybrid system covers 50% of total energy needs, reducing reliance on purchased electricity and district heating.
Primary energy consumption drops from 61.4 to 37.1 kWh/m²—a reduction of over 40%.
This system has an exceptional Seasonal Coefficient of Performance of 8.5, thanks to high solar self-consumption and system optimization.
The hybrid system deliver 6% more electricity than a standard PV installation thanks to liquid cooling that keeps PV cells operating at peak efficiency.
Request a feasibility study for your PVT project!
Planning a large-scale PVT project? We’ll assess the technical and economic potential of using Dualsun SPRING hybrid panels for DHW, heating, or pool heating—so your project moves forward with clarity.
PVT-source Heat Pump: for homes and large-scale projects alike
When thermal demand is high, geothermal isn’t feasible, or if you are simply looking for an attractive, silent and more efficient alternative to air to water heat pumps, the PVT-source Heat Pump system offers the ideal energy solution for your home or building.
Small residential
Multi-family, community swimming pools and more
Our innovation
The world’s first hybrid solar PVT technology
The front side
Converts sunlight into electricity.
The front side of the panel is composed of a high-performance photovoltaic panel for electricity generation (PV power of 425Wp).
The panel features cutting-edge TOPCon technology, delivering the highest cell efficiency for superior performance.
The back side
Captures heat from the sun, your roof, and the surrounding air.
The back side of the panel is composed of an innovative heat exchanger for thermal production (max thermal power of 940 W).
The panel is built with an ultra-durable, solar-grade aluminum heat exchanger—designed to last and ultimately, to be fully recycled.
The finned version offers 6.4 m² of heat exchange surface, allowing the panels to capture maximum heat—even at low temperatures—for reliable, year-round performance.







